The glass-lined reactor is a composite product by lining the glass containing high silica on the inner surface of the steel container, and burning it at high temperature to firmly adhere to the metal surface, thus becoming a composite product. Corrosion resistant equipment. Doing a good job in regular maintenance of the glass-lined reactor can not only repair the loss degree of the reactor equipment, but also reduce the failure rate of the equipment, thereby improving its work efficiency and prolonging its service life.
1. The upper part of the high-temperature and high-speed magnetic stirrer of the glass-lined reactor has an oil injection hole, which is set for injecting grease into the bearing when it is stopped. It can be used only after the pressure in the reactor is relieved. Add 30-50CC each time and inject it with a syringe.
2. Before dismantling, the glass-lined reactor should exhaust the reaction materials in the reactor and clean it with gas-liquid medium that is harmless to human body.
3. When overhauling the magnetic stirrer of the reaction kettle, it is not necessary to open the cover, just loosen the nut connected with the cover.
